Deleting Data - Ardo alyssa Mode D'emploi

Masquer les pouces Voir aussi pour alyssa:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
en
4.6
Memory function – Individual expressing at the touch of a button
You have found your ideal settings when your breast milk flows freely and you can express most successfully. Activating the
memory button
saves your expression history. When you next switch the breastpump on, you can automatically express
using the saved expression history in the stimulation mode and then in expression mode. The Ardo Alyssa breastpump stops
automatically after the saved time.
You can nevertheless change the values for the vacuum and cycle manually at any time and define a new time for the length
of the expression history. This takes you out of save mode. When you have finished expressing, you can save any changes to
the expression history. If you do not save the new values, the previous settings are kept.
Whenever the Memory Plus button lights up, your expression history is saved, and when the breastpump is switched on, it
automatically starts to pump with your individual data.
Using the Memory Plus function – step-by-step procedure
1
Expressing
Express using your favorite settings.
2
Saving an expression history
When you are finished expressing, tap on the Memory Plus button
confirmation, you will hear an acoustic signal, the button lights up and the breastpump automatically switches off.
3
Accessing your expression history
Switch the breastpump on. You express directly with your saved data. The Memory Plus button
throughout.

Deleting data

You can delete the saved data at any time if you do not want to express with the memory function. By slowly pressing the
Memory Plus button
once, the saved data are deleted and the button no longer lights up.
4.7
Power Pumping – Increasing the milk volume
Automatic Power Pumping is a pre-defined one-hour interval pumping program –
expressing three times with two pauses – that aims to increase the volume of milk
you produce. During the pauses you can remove the pumpset and move around freely.
The operation corresponds to the basic functions (see Section 4.5.1). The progress of
the expressing is indicated by the green and white segments that light up.
Power Pumping imitates the natural sucking behavior of babies. There are times –
usually in the evenings – when newborns or older babies want to be breastfed at
10-minute intervals to stimulate milk production (cluster feeding). More information
can be found in Section 7.4.
6
to save your individual expression history. As
= Expressing
flashes slowly
= Pause

Publicité

Table des Matières
loading

Table des Matières