Accumulation - Ohaus Defender 5000 Manuel D'instructions

EN-38

4.1.3 Accumulation

To start Accumulate weighing data, place the
object on the pan and press the Softkey
corresponding to the icon
accumulation icon will start blinking. The load to
be accumulated has to be >= 10d and the next
accumulation can only start once the pan has
been cleared.
When LFT is ON (no such limitation when LFT is
OFF or LFT is ON and the approved mode is
OIML),
a. Gross weight and Net weight cannot be
accumulated at the same time – only Gross
weight or Net Weight can be accumulated;
b. After a weighment, the Gross weight on the
pan has to reach 0 before a new sample can be
accumulated.
Note: The Accumulation icon
shown if Accumulate is set to Manual and
Automatic (see section 4.1.1).
Viewing the Accumulation Results
To view the accumulation results, press the
Softkey corresponding to the icon
The Accumulate Result screen is displayed.
To clear the accumulation results, press the button
When the instructional message "Clear the
statistical data?" appears, press the Softkey
corresponding to the icon
To return to home screen press the Softkey
corresponding to the icon
Press the button Print to print Accumulation result.
Find Quality Products Online at:
. The
will only be
.
.
.
GlobalTestSupply
www.
.
Defender 5000 Indicators
.com
sales@GlobalTestSupply.com