Discrete I/O; Weighing Unit; Gram (G); Kilogram (Kg) - Ohaus Defender 5000 Manuel D'instructions

Defender 5000 Indicators
Application Mode
& Discrete I/O
Filling
Reset

3.7 Weighing Unit

Enter this menu to activate the desired units. Default settings are bold.
NOTE: Due to national laws, the indicator may not include some of the units of measure listed. If the
Security Switch is set to ON, the Units are locked at their current setting.

3.7.1 Gram (g)

Set the status.
Off = Disabled
On = Enabled

3.7.2 Kilogram (kg)

Set the status.
Off = Disabled
On = Enabled

3.7.3 Pound (lb)

Set the status.
Off = Disabled
On = Enabled

3.7.4 Ounce (oz)

Set the status.
Off = Disabled
On = Enabled

3.7.5 Pound: Ounce (lb: oz)

Set the status.
Off = Disabled
On = Enabled

3.7.6 Tonne (Metric Tonne)

Set the status.
Off = Disabled
On = Enabled
Find Quality Products Online at:
Options (bold is default)
Discrete Input2 Off, Zero, Tare, Clear Tare, Print, Start, Reset
Off, Overload, Underload, Zero
Discrete Output1
Discrete Output2 Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Discrete Output3
Discrete Output4 Off, Overload, Underload, Zero
On, Off
Enable
Off, Zero, Tare, Clear Tare, Print, Start/Stop,
Discrete Input1
Pause/Continue
Off, Zero, Tare, Clear Tare, Print, Start/Stop,
Discrete Input2
Pause/Continue
Off, SP1, SP2, SP3, SP4, Alarm, Zero
Discrete Output1
Discrete Output2 Off, SP1, SP2, SP3, SP4, Alarm, Zero
Off, SP1, SP2, SP3, SP4, Alarm, Zero
Discrete Output3
Discrete Output4 Off, SP1, SP2, SP3, SP4, Alarm, Zero
GlobalTestSupply
www.
EN-27
.com
sales@GlobalTestSupply.com