Fault Finding - Gamko FK Mode D'emploi

Fault finding

Please ensure the plug is disconnected from the mains.
Symptom:
Cause:
Solution:
Symptom:
Cause:
Solution:
26
Temperature is too high with correctly set thermostat.
a. The refrigeration machine has no power supply
b. Cooler is overfull
c. Door is not closed fully
d. Thermostat is out of order
e. Compressor is out of order
f. The air flow grills are covered
g. The condenser is blocked with dust
a. Check power supply
b. Replenish capacity more regularly
c. Clean the magnetic door gaskets or replace
d. Call your local Gamko distributor
e. Call your local Gamko distributor
f. Clear the air flow grills
g. Clean the condenser
Temperature is too low with correctly set thermostat
Thermostat is out of order
Call your local Gamko distributor