General
For all actions in machinery or electric parts: ensure the plug is
disconnected from the mains.
It is possible that sharp parts appear in the engine room.
Be careful if you have to do operations in the engine room.
It is possible that parts in the engine room are very hot (90°C).
Convince yourself that all parts are chilled enough before you do
operations in the engine room.
Always mount eventual removed grids and/or other parts on the
same place as before.
Maintenance
The Kegcooler should be cleaned with look-warm water and a mild
domestic cleaner, never use abrasives or harsh chemicals.
You should clean the condenser at least once a month by means of a
vacuum cleaner or compressed air.
25