GOAT stops working and
returns to the Charging
Station.
The GOAT is not
operating at the correct
time.
Other Issues or
Situations.
34
EN
The battery temperature is
E674
out of range.
/
The battery voltage is low. Wait until the battery is fully charged.
Rain Sensor is triggered
/
or it is the end of a
scheduled task.
The schedule for the
/
GOAT is not correct or the
timezone is not correct.
The GOAT automatically
starts the recutting task,
due to reasons like
/
recharging, rain delay, or
an uncut shadow area
from last time because of
poor lighting.
Any other abnormal
/
phenomena.
1. Place the GOAT in an area with an appropriate temperature, or wait until the
battery temperature returns to normal.
2. Restart the GOAT.
3. If the problem persists, please contact the Customer Service.
Normal phenomenon, please wait until the task resumes, or you can change the
rain delay setting or schedule on the APP.
Please check if the settings are correct.
1. The recutting of uncut shadow areas is set to start on the next morning by
default. The next day, you can set the proper schedule to allow the GOAT to work
within the allowed time.
2. You can also set the "Animal Protection" time on the APP to limit the time the
GOAT can operate.
1. You can check the error message on the APP for detailed information.
2. Resolve the issue, and then you can restart the GOAT to resume operation.
3. If the problem still exists, please contact the Customer Service.