Publicité
Les langues disponibles
Les langues disponibles
Panel Display Reads:
Display
Standing by. No task assigned
Current Battery Level (For example, the
number shown in the image represents the
current battery level as 100%.)
STOP
GOAT is paused. Please press
continue working, or
the charging station.
ON
GOAT is working
OTA
GOAT is undergoing OTA updates
E and a 3-digit Error Code.
Go to the Troubleshooting section of this
manual or visit https://www.ecovacs.com/
global for the meaning of the Error Code
messages and recommended solutions.
16
EN
Description
--> OK to
--> OK to return to
1.Start GOAT:
Press and hold [OK] for 3 seconds on GOAT and the digital tube display
will flash as below.
Note:
Your GOAT will be automatically powered on when it docks at the Station.
2.Set PIN Code:
When the GOAT is off map or to be powered on or reset, it will
automatically be locked. You can unlock it by entering the right PIN
code.
Set the PIN code when the display shows as below.
Press [+] or [-] to select the PIN code numbers one by one. After the
first digit is decided, press [OK] to comfirm, and the cursor will move to
the next digit.
1. If the
is flashing, please set the PIN code.
2. If the
is solid, enter the previously set PIN code.
3. Once unlocked, the
will disappear. If unlocking fails, the
again, prompting you to reset the PIN code.
Note:
•
0000 is an invalid PIN code.
•
PIN code is to be entered twice to con rm the setting.
•
If you enter the wrong numbers while setting the PIN code, the setting process
will start all over again.
•
You may change the PIN code on the App.
will flash
Publicité
