Maintenance And Care - kikkaride AXES Mode D'emploi

6.2 Store the electric scooter
• Always power o the switch whenever the scooter is not in use.
• Fully charge your battery before storing.
• If you store the electric scooter more than one month, please charge it at least every three months.
• If the storage ambient temperature is below O C, please do not charge. You can bring the electric scooter into a warm environment
(above 10 C) for charging.
• To prevent dust from entering the electric scooter, you should cover electric scooter.
• Store electric scooter indoors in a dry and suitable temperature. If you do not use it for a long time, please do not connect the power.
6.3 Maintenance
WARNING ! As with any mechanical component, this product is subject to high stresses and wear. The various materials and components
may react di erently to wear or fatigue. If the expected service life for a component has been exceeded, it may break suddenly, therefore
risking causing injuries to the user. Cracks, scratches and discoloration in the areas subject to high stresses indicate that the component
has exceeded its service life and should be replaced.
• Check that all parts are su ciently tightened and the handlebar is securely xed.
• All nuts and bolts may lose their tightness over time, please check the tightness of all nuts and bolts every time you ride.
• The wheels and wheel bearings may become worn out with natural wear and tear over time. Please check the condition of the wheels
and bearings regularly and replace them when necessary. Please contact the place of purchase for new wheels.
• Do not attempt to make any modi cations to the scooter by yourself.

MAINTENANCE AND CARE

Plastic and metal parts
1. The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
2. Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage
of the metal and plastic parts and fading of the fabrics of the crib.
3. When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low
room temperatures.
From time to time check all plastic parts that are hanged on the frame. Tighten all screw and bolts if necessary.
PROBLEMS
Scooter suddenly stops working
If Battery is in lower power: Fully charge the battery.
If Loose plug or wire: Check all wires and connectors to make sure that they are connected and tight.
ENGLISH