Storage And Care - kikkaride DUSTY Mode D'emploi

WARNING
• It is recommended to use protective equipment.
• Ensure that your child has put on a helmet, knee pads and elbow pads before traveling.
• Also, the child should wear comfortable shoes with a rubber sole.
• Before use, carefully read the instructions for assembling a scooter.
• The scooter must only be assembled by an adult.
• Either the scooter assembly must be tested by an adult.
• Before use, you must instruct the child.
• It is forbidden to ride from the slopes and drive into the slope.
• The scooter brake is not designed to brake when rolling from a mountain.
• It is forbidden to travel on this model at a speed of more than 15 km / h.
• Children may use the scooter only under the supervision of an adult.
• Before use, check how tightly all bolts and nuts are tightened.
• Do not recommend for children under 6 years.
• This product complies with European standard EN 14619. The materials used for making this product are
suitable and safe for children' s health.
ASSEMBLING THE SCOOTER
Before assembly, it is recommended to check the availability of all the components of the scooter. To do this,
unpack the box, pull out all the components and lay out on a flat smooth surface.
1. Insert the knobs into the corresponding holes, pressing down on the latch, until a characteristic click
(Figure 1).
2. In order to lay out the scooter, loosen the lock on the frame, take it aside and pull the plastic eccentric.
If you feel that the progress of the steering rack has become freer, lower the deck until it clicks. Then, slightly
tighten the nut next to the retainer and turn it towards the frame (Figure 2).
COMPLETE SCIENCES
In order to fold the scooter, repeat the same steps in reverse order.
STEERING HEIGHT
In order to set the required height of the steering wheel, you need to loosen the clamp of the steering rack of the
scooter, pull the steering wheel up / press it (if you need to lower it) and turn the clamp back (Figure 3).

STORAGE AND CARE

It is recommended to lubricate the bearings and fixings of the scooter.
It is recommended to store the scooter in a dry ventilated area.
ENGLISH