Adjustment - JB Systems High Q10 Mode D'emploi

ADJUSTMENT

Pitch Control
•
The pitch control is variable in a range of ±10%.
During play, observe the strobe dots. When the strobe dots
•
appear to flow to the right, the speed is slower that the rated
speed. When they appear to flow to the left, the speed is faster
than the rated speed. When they appear stationary, it means
the turntable is in normal speed.
Move the pitch control slider up or down to adjust the speed.
•
MAINTENANCE
Clean the stylus periodically with a soft brush to prevent the
•
accumulation of dust.
When the sound becomes distorted or noisy, check the stylus.
•
If worn out, replace it with a new one.
From time to time, the dust cover and turntable cabinet should
•
be wiped with a soft, dry cloth. Do not use any volatile
materials as alcohol, thinner, benzine, etc... they may remove
the paint or damage the lustre.
High Q10 6