Custom.pois.(Points.of.interest); Finding Custom Pois - Kenwood KNA-G510 Mode D'emploi

Custom POIs (Points of Interest)
You can manually load custom points of interest (POI)
databases, available from various companies on the
Internet. Some custom POI databases contain alert
information for points such as safety cameras and school
zones. The navigation system can notify you when you
approach one of these points.
CAUtIoN: Garmin is not responsible for the
consequences of using a custom POI database or
the accuracy of the safety camera or other custom
POI database.
After downloading your POI database, use the Garmin
POI Loader to install the POIs onto an SD card. Then,
you can use the SD card to load the POIs into the KNA-
G510. The POI Loader is available at
.garmin.com/products/poiloader.
Help file for more information; press F1 to open the Help
file.
KNA-G510 Instruction Manual
http://www
Refer to the POI Loader
When you insert the SD card into the KNA-G510, a
message appears on the screen, prompting you to save
the custom POIs to your navigation system. Select Yes.
If you select No, custom POIs will not work.
Note: Each time you load custom POIs to the
navigation system, any other custom POIs already
saved in the system will be overwritten.

Finding Custom POIs

To view a list of the custom POIs loaded in your
navigation system, touch
Custom poIs.
a
Where To? > My Locations
PPendiX
>
EN-