Removing Pad Frames; Pad Frame Positions - Seeley LCQ Manuel Du Propriétaire

REMOVING PAD FRAMES

Insert a flat screw driver tip into the slot as
shown and lever until disengagement occurs.
Take hold of the pad frame and pull it towards
you until the internal side clips disengage.
Pivot the pad frame outwards and lift up.
Take care not to damage the pad.

PAD FRAME POSITIONS

All Supercool Chillcel pads for LCS/TBS or
TBSI coolers have the side edges rebated to
provide clearance for corner posts. Note the
position required for the pad with the Drain
Valve ("B" Rebate) rebate.
"A" Rebate
ILL974-B
A
ILL975-C
If fitted incorrectly they may cause
problems:
• Thicker pads may catch on internal
components causing damage.
• Thicker pads may impede the correct
operation of the float valve.
• Incorrect positioning of pads may cause a
drop in cooler performance.
• Incorrect fitment may allow water to bypass
the pad and be carried over into the air
stream and ducting.
ILL976-D
• Water bypass may cause damage to internal
electronic components.
LCQ / LCS / LCQI / BMQ / CPQ / TBQ / TBS / TBQI / TBSI |
"B" Rebate
Drain Valve rebate
A
A
B
ILL2128-A
9