ADURO H1 Mode D'emploi page 63

Aduro H1 has the following ALARM modes where pellet delivery must be stopped immediately:
•
SMOKE SENSOR: smoke sensor defect. SHAFT SENSOR: shaft sensor defect. TERMO: shaft
sensor too hot.
•
DOOR CONTACT: door open.
•
PELLET DAMPER: damper closed. EXIT: defect exit for external snail.
•
FUEL: smoke temperature too low after more than an hour of operation – no fuel?
•
LIGHTING: smoke temperature not reached after two attempts to light the fire. CO: CO (carbon
monoxide) level is too high.
Here the ALARM will be red.
When the cause of alarm has been rectified, the stove can be started by pushing ON/OFF twice.
The development within phones and electronics continuously provides new possibilities and demands for
updates and development of the app. When you buy an Aduro Hybrid stove, updates of the app and control
is included 5 years after purchase. After this, charges may apply for updates.
5. Control of Aduro H1
63