Quick Set-Up Guide - Numatic TRO 650 Mode D'emploi

Quick Set Up Guide / Schnellanleitung /
!
Please read before commencing any operation.
After the removal of all the packaging, carefully open and check the contents of the start up pack (Fig.1).
1
2
Fig.2a
Lift top tank assembly to reveal battery compartment.
Always lift between points as illustrated to ensure personal safety (Fig.1a).
Fit battery fuses (contained in start-up pack) into the battery fuse holders as illustrated (Fig.2).
Remove transit block from pallet (Fig.2a).
Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.
3
Insert key (Fig.3) into ignition and turn quarter-turn clockwise to the 'ON' position.
Ensure that the forward/reverse switch is set to forward (Fig.4).
Depress accelerator pedal with right foot and slowly drive machine off of the pallet
using the ramp provided (Fig.5).
is seated.
When the machine is removed and in a safe position, turn key back to the off position (Fig.6).
Fig.1a
Fig.3
Fig.4
16
Guide d'installation rapide / Snelstartgids
!
Contents:
1 x Operator Manual
2 x Battery charging lead
2 x Keys
3 x 40 amp fuses (1 x spare)
2 x Side pod skirts
1 x Brake disengage key
1 x Maxi fuse-puller
Fig.1
Fig.2
Fig.5
Fig.6