Vorwerk KOBOLD SPB100 Manuel D'utilisation page 69

Fault
The floor is getting too wet.
Possible cause and solutions
– Check the LED wave symbol on the DuoClean. If it is lit up
yellow, you need to fill the tank, see
inserting the tank
– Moisten the cleaning cloth by pressing the function key
before continuing, see
and dry mode
– Set the DuoClean to dry mode, see
of moisture and dry mode
– Continue working without the automatic moistening
function for the time being until the floor appears to be
drying.
– Then set the DuoClean to moisture setting 1, see
Automatic application of moisture and dry mode
If the fault cannot be rectified, please contact Vorwerk customer
service, see Service
[} 55].
Automatic application of moisture
[} 56].
[} 56].
[} 70].
Removing, filling and
Automatic application
[} 56].
69