Rotary Hammer Safety Warnings; Standard Accessories - HIKOKI DH 28PD Mode D'emploi

Marteau perforateur
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
English

ROTARY HAMMER SAFETY WARNINGS

1.
Wear ear protectors.
Exposure to noise can cause hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4.
Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
SPECIFICATIONS
Voltage (by areas)*
Power Input
No-load speed
Full-load impact rate
Capacity: concrete
steel
wood
Weight (without cord and side handle)
Dust collecting adapter
Max. hole-drilling depth:
Diameter of drill:
Max. length of drill (effective length):
Dust box capacity:
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Plastic case .................................................................. 1
(2) Side handle ................................................................. 1
(3) Stopper ........................................................................ 1
(4) Cover ........................................................................... 1
(5) Rubber cap (replacement) ......................................... 1
Standard accessories are subject to change without
notice.
9
5.
Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
6.
Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
7.
Wear a dust mask
Do not inhale the harmful dusts generated in drilling
or chiseling operation. The dust can endanger the
health of yourself and bystanders.
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
720 W
0 – 1050 min
0 – 4000 min
4 – 28 mm
13 mm
32 mm
4.7 kg
85 mm (adjustment possible between 0 and 85 mm)
4 – 18 mm
100 mm
0.4 liters
–1
–1

Publicité

Table des Matières
loading

Table des Matières