General Safety Instructions; Technical Data; Scope Of Supply - Roller Convex Notice D'utilisation

eng
Translation of the Original Instruction Manual
Fig. 1 – 3
1 Lower roller holder
2 Upper roller holder, with laterally
adjustable roller bearing plate
3 Back former support
4 Bending drive
5 Bolt
6 Spring loaded pin
7 Rollers / Back formers
8 Rack/advance plunger
9 Wing nut
10 Bending former
11 Advance lever

General Safety Instructions

CAUTION CAUTION
Read all the safety notes, instructions, illustrations and technical data which
come with this tool. Failure to heed the safety notes and instructions can lead to
severe injuries.
Keep all safety notes and instructions for the future.
Only use the tool for the intended purpose and under observance of the general
safety and accident prevention rules.
a) Keep your workplace tidy. Untidiness in the work area can cause accidents.
b) Use the right tool. Do not use weak machines for heavy work. Do not use the
tool for a purpose for which it is not intended.
c) Check the tool for damage. Slightly damaged parts must be checked carefully
for perfect and proper functioning before using the tool. Check whether the moving
parts work perfectly and do not jam or are damaged. All parts must be mounted
correctly and meet all conditions to ensure perfect operation of the tool. Damaged
parts must be properly repaired or changed by a recognised specialist unless
specifi ed otherwise in the operating manual.
d) Be careful. Pay attention to what you are doing. Work sensibly.
e) Do not overload your tool. You can work better and safer in the specifi ed work
range. Renew worn tools in time.
f) Wear suitable work clothing. Do not wear loose clothing or jewellery as these
can get caught in moving parts. Rubber gloves and non-slip shoes are recom-
mended for working outdoors. Wear a hair net over long hair.
g) Use safety equipment. Wear safety glasses. Wear protective gloves.
h) Avoid abnormal body posture. Make sure that you have a fi rm footing and
keep your balance at all times.
i) Take good care of your tools. Keep the tools clean to work better and safer.
Follow the maintenance regulations and instructions. Keep handles dry and free
from grease and oil.
j) Take ambient infl uences into account. Do not expose your tools to rain. Provide
good lighting.

1. Technical Data

Use for the intended purpose
CAUTION CAUTION
ROLLER'S Convex, ROLLER'S Polo, ROLLER'S Hydro-Polo are intended for the purpose of cold pressure bending of pipes up to 90°.
All other uses are not for the intended purpose and are therefore prohibited.

1.1. Scope of Supply

ROLLER'S Convex:
ROLLER'S Polo up to Ø 26 mm:
ROLLER'S Polo up to Ø 32 mm:
ROLLER'S Hydro-Polo up to Ø 26 mm: Oil-hydraulic hand pipe bender, bending formers according to ordered set, back former supports H-S Ø 10 – 26 mm,
ROLLER'S Hydro-Polo Ø 32 mm:
ROLLER'S Hydro-Polo INOX Set:
1.2. Article numbers
Drive unit
Bending formers
Roller (pack of 2)
Back former Ø 75 mm (pack of 2)
Back former support S Ø 10–26 mm
Back former support H-S Ø 10–26 mm
Back former support Ø 32 mm
Tripod stand
Device for reverse bend
Transport box
12 Locking screw
13 Return valve
14 Angle marking
15 Marking for precise bending
16 Foot
17 Scale
18 Arrow direction
19 Bending former holder
20 Back former support holder
21 Bridge
22 Doglegs on several levels
Oil-hydraulic pipe bender, 2 roller holders, 2 rollers, bending formers according to ordered set, operating instructions,
transport box.
One-hand pipe bender, bending formers according to ordered set, back former supports S Ø 10 – 26 mm, steel case,
operating instructions.
One-hand pipe bender, bending formers according to ordered set, back former supports S Ø 10 – 26 mm, back former
supports Ø 32 mm, case, operating instructions.
case, operating instructions,
Oil-hydraulic hand pipe bender, bending formers according to ordered set, back former supports H-S Ø 10 – 26 mm,
back former supports Ø 32 mm, case, operating instructions.
Oil-hydraulic hand pipe bender, aluminium bending formers Ø 15, 18, 22 mm, back former support H-S Ø 10 – 26 mm,
case, operating instructions.
ROLLER'S Convex
590000
see Fig. 3
590110
590111
590150
590160
k) Keep other persons away. Do not let other persons touch your tools. Keep other
persons and especially children away from your work area.
l) Only use genuine accessories and genuine spare parts for your own safety
for the intended function of the tool. The use of other insertion tools and
accessories can cause you injury.
m) Have your tool repaired by a qualifi ed specialist. This tool satisfi es the perti-
nent safety regulations. Repairs may only be done by a recognised specialist or
instructed person with the use of genuine spare parts, otherwise the user could
have an accident. All unauthorised modifi cations to the tool are prohibited for
safety reasons.
Safety instructions for oil-hydraulic pipe benders, one-
hand pipe benders, oil-hydraulic hand pipe benders
CAUTION CAUTION
Read all the safety notes, instructions, illustrations and technical data which
come with this tool. Failure to heed the safety notes and instructions can lead to
severe injuries.
Keep all safety notes and instructions for the future.
● Do not use the tool if it is damaged. There is a danger of accident.
● Do not reach between the pipe, rollers/back formers (7) and the bending
former (10) during bending. There is a risk of injury.
● Protect persons accompanying the work against the moving pipe during
bending. There is a risk of injury.
● Be careful when bending with ROLLER'S Convex and ROLLER'S Hydro-
Polo. These develop a high bending force. There is a danger of injury in case
of improper use.
● Do not lift or carry the ROLLER'S Convex by the attached advance lever
(11). The advance lever is only inserted but not secured. The bender drive (4)
can come loose from the advance lever (11) and fall off. There is a risk of injury.
● Children and persons who, due to their physical, sensory or mental abilities
or lack of experience and knowledge are unable to operate the tool safely
may not use this tool without supervision or instruction by a responsible
person. Otherwise there is a risk of operating errors and injuries.
● Only allow trained persons to use the tool. Apprentices may only use the
tool when they are over 16, when this is necessary for their training and
when they are supervised by a trained operative.
Explanation of symbols
CAUTION CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
ROLLER'S Polo ROLLER'S Hydro-Polo
153100
see Fig. 6
153125
153115
153140
ROLLER'S Hydro-Polo INOX
153500 153510
see Fig. 8 see Fig. 8
153501 153501
153115 153115
eng
9