Names And Functions Of Parts; Turntable Cover - Teac TN-100 Mode D'emploi

C USB port (USB B type)
Connect this to the USB port of a computer to con-
vert the audio signal from this unit to digital and
output it to the computer (page 7).
DC input connector
D
After completing all other connections, connect
the included AC adapter to this jack.
Confirm that the power plug of the AC adapter is
plugged into a power outlet.
o Unplug the power cord from the outlet when
you are not planning to use the unit for an
extended period of time.
o Do not use any AC adapter other than the one
included.
V Be sure to connect the power cord to an AC
outlet that supplies the correct voltage.
Connection to an outlet that supplies incor-
rect voltage could cause fire or electric shock.
Hold the power plug when plugging it into an
outlet or unplugging it. Never pull or yank on
the power cord.
Unplug the power cord from the outlet when
you are not planning to use the unit for an
extended period of time.
STANDBY/ON button
E
Press the STANDBY/ON button to turn the unit on
or put it in standby.

Names and functions of parts

a Turntable
Place records centered on the turntable.
b Cue lever
Use this lever to lift the tone arm and to lower it to
the record.
Rotation speed setting switch
c
Set the rotation speed (RPM) suitable for the record.
Tone arm holder
d
This is a rest for the tone arm. Gently push the clasp
to the right to release the tone arm before playing
a record.
e Tone arm
f Headshell
a a
Attaching the turntable cover

Turntable cover

b
c
Main unit
d
e
f
1 Insert the hinges completely into the
hinge holders at the left and right
ends of the back of the main unit.
2 Align the tops of the hinges with the
turntable cover hinge holders and
insert them.
Removing the turntable cover
Hold both edges of the turntable cover and lift it slowly
to remove it along with the hinges from the unit. Then,
remove the hinges from the turntable cover.
Turntable cover
Opening and closing the turntable
cover
Open
Hinge
Opening
Hold the front edge of the turntable cover and gently
lift it open completely until it stops.
The turntable cover will stay open in this position.
Closing
Gently lower the turntable cover until it is closed.
V Be careful not to pinch your hand, for exam-
ple, when opening and closing the turntable
cover.
5