Philips Avent SCF355/07 Mode D'emploi page 6

ENGLISH
6
Explanation of settings
The bottle warmer is switched off and the light is off. On every other setting,
the appliance is switched on and the light is lit.
Select this setting when you want to quickly warm a bottle of milk at room
temperature (22 °C/72 °F) with a content from 60 ml/2 oz to 330 ml/11 oz or at
cold temperature (5 °C/40 °F) with a content from 60 ml/2 oz to 240 ml/8 oz.
The bottle has to be taken out immediately after warming to the right
temperature, otherwise the milk will be overheated.
Select this setting when you want to quickly warm a bottle of milk at cold
temperature (5° C/40 °F) with a content from 270 ml/9 oz to 330 ml/11 oz.
The bottle has to be taken out immediately after warming to the right
temperature, otherwise the milk will be overheated.
Select this setting when you want to warm a container/jar of baby food.
This setting warms milk at a slower speed and then keeps it warm.
Defrost a bottle/container of milk/baby food to liquid state. No Warming
occurs.
Using the bottle warmer with express milk warming setting
1
Put the mains plug in the wall socket. Place a bottle in the bottle warmer.
2
Fill the bottle warmer with drinking water up to the level of the milk in the bottle. In case of
large amounts of milk, the maximum level of water is approximately 1 cm below the top of
the bottle warmer. An accurate water level ensures correct warming performance.