Balluff BTL6-U110-M PF-S4 Série Notice D'utilisation page 38

BTL6-U110-M _ _ _ _ -PF-S4
Magnetostrictive Linear Position Sensor – Profile Style
6
IO-Link interface (continued)
6.4 Parameter Data
Sub-
Index
index
0x0010 0 Vendor Name
0x0011 0 Vendor Text
0x0012 0 Product Name
0x0013 0 Product ID
0x0014 0 Product Text
0x0015 0 Serial Number
0x0016 0 Hardware Revision
0x0017 0 Firmware Revision
0x000C 0 Device Access Locks
0x000D 3 Profile Characteristic
0x000E 0 PD Input Descriptor
0x0018 0 Application Specific Tag
0x0040 0 Null point offset
0x0041 0 Takeover of null point
offset
Tab. 6-3: Parameter data of IO-Link interface
Access to subindex 0 address the entire object
of an index. Access of subindices > 0 addres-
ses the individual elements of an index.
Device Access Locks
With this standard parameter, it is possible to activate or
deactivate certain functions of the IO-Link device. With
BTL, there is the option to lock the function of the parame-
ter manager. To do so, bit 1 of the 2-byte value must be
set to 1 (locked). In order to unlock the parameter mana-
ger, bit 1 is set to 0.
Bit Function
0 Lock parameter access (not supported)
1 Lock parameter management (supported)
2 Lock local parameterization (not supported)
3 Lock local user interface (not supported)
4...15 Reserved
Tab. 6-4: Lock parameter data
14 english
Parameter Size
7 bytes
15 bytes
Max. 40 bytes
12 bytes
27 bytes
Max. 18 bytes
2 bytes
9 bytes
2 bytes
6 bytes
3 bytes
32 bytes
4 bytes
Boolean
(1 byte)
Parameter-
Access
management
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read/Write Yes
Read Only No
Read Only No
Read/Write Yes
Read/Write No
Write Only No
Profile Characteristic
This parameter indicates which profile is supported by
the IO-Link device.
BTL supports the smart sensor profile with the following
function classes:
– Subindex 1 (Profile Identifier -> DeviceProfileID):
0×0001 (Smart Sensor Profile)
– Subindex 2 (Profile Identifier -> FunctionClassID):
0×8000 (Device Identification Objects)
– Subindex 3 (Profile Identifier -> FunctionClassID):
0×8002 (ProcessDataVariable)
PD Input Descriptor
This parameter describes the composition of the process
data variables used.
The BTL processes the process data variable as follows:
Subindex 1: 0x032000
– 0x03 -> Data type = IntegerT
– 0x20 -> Data size = 32 bits
– 0x00 -> Offset = 0 bits
Application Specific Tag
The Application Specific Tag makes it possible to assign
the IO-Link device an arbitrary, max. 32-byte string. This
can only be used for application-specific identification and
applied in the parameter manager. The entire object is
accessed via subindex 0.
Default value
"BALLUFF"
"www.balluff.com"
"BTL6-U110-Mxxxx-PF-
S4"
"BTL6PFIOLxxx"
"Balluff Position
Transducer"
"YYMMDDXXXXXXXX"
"XX"
"vX.XX.XXX"
0x00 0x01 0x80 0x00
0x80 0x02
0x03 0x20 0x00
0