Charging The Emag 70 Hd - Schweizer eMag 70 HD Notice D'utilisation

Charging the eMag 70 HD

Note: You must use the supplied power adapter to charge the eMag 70 HD. (It cannot be charged via
the USB port on a computer).
1. Plug one end of the power adapter into the eMag 70 HD and the other end into a wall outlet.
2. The battery status LED flashes green to show that the battery is charging.
3. As soon as the battery is fully charged, the LED stops flashing and remains green. Unplug the eMag 70 HD
power adapter. The battery status LED turns off.
4. You can now use the eMag 70 HD continuously for approx. 4 hours. When the battery is running low, the
battery status LED flashes red. Connect the power adapter and plug it in to recharge the battery.
Note: The eMag 70 HD switches to power save mode after 30 minutes (screen switches off) if no button
is pressed during this time. Press the green/yellow power button
12 12 12
to reactivate the eMag 70 HD.