Maintenance And Cleaning; Environmentally Compatibile Disposal - Vortice NORDIK MIO Notice D'emploi Et D'entretien

ENGLISH
SPEED
Then fan is equipped with 4 levels of speed, each press of the speed button will change 1 level, 1-2-3-4-1-2
etc....
TIMER
You can set the turn off timer from 1H up to 4H by pressing the timer button.
OSC
With the OSC button you can activate th oscillation of the fan, or switch between 45° or 70° degree of rotation.

Maintenance and cleaning

- Always turn off and unplug the fan before cleaning and
maitenance.
- Use only soft and dapened cloth to gently wipre the
outer surfaces of the fan.
- Do not use strong chemicals to clean the fan.
- For storage, leave the fan assemble but covered, in
order to protect it from dust.Also store the fan in a cool
and dry place.
Important information on environmentally compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS APPLIANCE IS NOT SUBJECT TO THE
REQUIREMENTS OF NATIONAL LAWS IMPLEMENTING THE WEEE DIRECTIVE; CONSEQUENTLY
THERE IS NO OBLIGATION TO OBSERVE SORTED COLLECTION PROCEDURES WHEN DISPOSING OF
THE APPLIANCE IN THESE COUNTRIES.
This product conforms to EU Directive EU 2012/19/EC.
Important
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of
its useful life, it must not be disposed of as domestic waste, but must be taken to a collection
centre for waste electrical and electronic equipment, or returned to a retailer on purchase of
a replacement.
It is the user's responsibility to dispose of this appliance through the appropriate channels at
the end of its useful life. Failure to do so may incur the penalties established by laws
governing waste disposal.
Proper differential collection, and the subsequent recycling, processing and environmentally
compatible disposal of waste equipment avoids unnecessary damage to the environment and possible related
health risks, and also promotes recycling of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop
from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities for recycling processing and environmentally compatible
disposal either directly or by participating in collective systems.
12