Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole (arbor) diameter (country specific)
Max. kerf thickness of the saw blade
Max. miter angle
Max. bevel angle
No load speed
Dimensions (L x W x H)
Rated voltage
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Cutting capacities (H x W) with blade 216 mm (8-1/2") in diameter
45° (left and right)
60° (left and right)
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Miter angle
0°
702 mm x 551 mm x 557 mm (27-5/8" x 21-3/4" x 22")
D.C. 36 V - 40 V max
16.4 - 17.0 kg (36.2 - 37.6 lbs)
45° (left)
50 mm x 312 mm
(2" x 12-1/4")
50 mm x 220 mm
(2" x 8-5/8")
–
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2 ENGLISH
LS002G
216 mm (8-1/2")
15.88 mm (5/8")
2.4 mm (3/32")
Left 60°, Right 60°
Left 48°, Right 48°
4,800 /min
BL4025 / BL4040
DC40RA
Bevel angle
0°
45° (right)
70 mm x 312 mm
30 mm x 312 mm
(2-3/4" x 12-1/4")
(1-3/16" x 12-1/4")
70 mm x 220 mm
30 mm x 220 mm
(2-3/4" x 8-5/8")
(1-3/16" x 8-5/8")
70 mm x 155 mm
(2-3/4" x 6-1/8")
–
Publicité
Table des Matières
