Operation Instructions - erba 33625 Mode D'emploi

GB - INSTRUCTION MANUAL

8. OPERATION INSTRUCTIONS

When using the heat gun for the first few times there may be some smoke coming out of the
product. This is normal and no sign of damage.
Use the temperature gauge (4) to turn on the heat gun. Setting 1 will give you temperatures of up to
350°C and setting II of up to 550°C.
The heatprotector (2) can be removed as shown in images A and B. Let the heat gun cool down
completely before removing or attaching the heatprotection. To cool down the heat gun turn it off,
unplug it and place it on a flat, stable and non-flammable surface (C) and away from any flammable
materials (curtains, plants, etc.). Do not leave the heat gun unattended untill it has fully cooled
down!
See images D to G for various kinds of applications.
Page 12
Instruction manual
ERBA GmbH
33625
A-1230 Wien
Issue: 12/2017
Talpagasse 6
Changes, print, punctuation and other errors reserved!
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at