Noise Emission Values; Important Information For Initial Operation; Operation Instructions; Service And Replacement Parts - erba 20062 Mode D'emploi

GB - INSTRUCTION MANUAL

6. NOISE EMISSION VALUES

See technical data.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

See operation instructions.

8. OPERATION INSTRUCTIONS

Screw the suction tube to the body of the spray gun.
Stick the suction tube into the standard sealant/underbody coating can and screw the can to the
spraygun.
Connect the spraygun to a suitable air compressor.
The underbody gun is now ready for use.
If you want to use it for cavity sealing, attach the distributing hose to the spraygun.

9. SERVICE AND REPLACEMENT PARTS

Use original spare parts only.

10. WARRANTY

Legal warranty regulations apply.

11. DISPOSAL

Our products are packed in order to prevent damage during transport. Packing materials are va-
luable resurces and therefore can and should be recycled. The product itself consists of various
materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your
federal and local disposal regulations.

12. LEGAL INFORMATION

All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is
strictly prohibited without the written permission of ERBA GmbH.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 8
Changes, print, punctuation and other errors reserved!
Instruction manual
20062
Issue: 03/2018