Product Description; Designated Use; Technical Data; Noise Emission Values - erba 33632 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 – Quickchange dial
2 – On/Off Switch
3 – Tool holder with dustcap
4 – Speed dial
5 – Dust extractor tube with adapter for vacuum cleaners
6 – Clamp for dust extractor tube
7 – Saw / Scraper
8 – Sanding pads with padholder

3. DESIGNATED USE

The multitool is designed for dry sanding of wood, gypsum, metal and plastic surfaces, for scraping
off dirt or paint and for cutting wood and plastic. Any other use is prohbited. The buyer accepts all
liabilities, legal and otherwise, for any damage or injury resulting from improper use of the product
(i.e. any other use than the above stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

230 V – 50 Hz
Power Supply:
300 W
Power consumption:
15.000-22.000 U/min
No load speed:
3°
Oscillation angle:
90,4 dB(A) ±3dB
Sound pressure level (LPA):
Sound power level (LWA): 101,4 dB(A) ±3dB
9,988 m/s²
Vibration on handle:
II
Protection class:
IP 20
IP class:

6. NOISE EMISSION VALUES

See technical data.
Page 12
Instruction manual
ERBA GmbH
33632
A-1230 Wien
Issue: 05/2019
Talpagasse 6
Changes, print, punctuation and other errors reserved!
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at