Noise Emission Values; Important Information For Initial Operation; Operation Instructions; Service And Replacement Parts - erba 18022 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
GB - INSTRUCTION MANUAL

6. NOISE EMISSION VALUES

See technical data.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

See operation instructions.

8. OPERATION INSTRUCTIONS

connect the ratchet wrench to the air hose with the air coupling (5)
chose the correct sized socket bit for the given application and connect it to the tool connector (3).
put the ratchet wrench on the bolt/nut you want to tighten/loosen, chose the rotational direction
accordingly (2) and engage the powerswitch (4).
the torque can be adjusted from 0 (min. torque) to 5 (max. torque) by using the torque dial (1)

9. SERVICE AND REPLACEMENT PARTS

Use original spare parts only.

10. WARRANTY

Legal warranty regulations apply.

11. DISPOSAL

Our products are packed in order to prevent damage during transport. Packing materials are va-
luable resurces and therefore can and should be recycled. The product itself consists of various
materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your
federal and local disposal regulations.

12. LEGAL INFORMATION

All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is
strictly prohibited without the written permission of ERBA GmbH.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 11
Changes, print, punctuation and other errors reserved!
Instruction manual
18022
Issue: 06/2017

Publicité

Table des Matières
loading

Table des Matières