Publicité
Les langues disponibles
Les langues disponibles
PARTS OF CONVECTION HEATER
ASSEMBLY OF THE HEATER
Before using the heater, the
feet (supplied separately in the carton), must
be fitted to the unit. These are to be attached
to the base of the heater using the 4 self-
tapping screws provided, taking care to ensure
that they are located correctly in the bottom
ends of the heater side moulding.
CLEANING THE CONVECTOR
Unplug the convector before cleaning and
leave it to cool down entirely.
Wipe the unit with a soft, non-abrasive
damp cloth.
Do not use any kinds of detergents or
chemical based cleaners on the unit as it may
damage the body.
NEVER IMMERSE IN WATER
when storing, stand in an upright
position in a cool, dust free place-preferably in
it is packaging.
This guide is intended to help you install and
care for your fan heater.
Please read all documentation carefully before
installing and using your heater.
Important: Please keep your guide in a safe
place for future reference.
FOR YOUR OWN SAFETY
1. Read all documentation before using the fan
heater.
2. Only connect the fan heater to a single-
phase socket with a main voltage as specified
on the rating plate.
3. This appliance meets the electromagnetic
compatibility requirements specified in BN
55104/95 with regard to interference with radio
and TV sets.
4. Do not leave your home while the appliance
is operating : ensure that the switch is in OFF
(0) position and the thermostat is in minimum
position. Always unplug the appliance.
5. Keep combustible material such as furniture,
cushions, bedding, paper, clothes, curtains etc.
at least 100cm away from the fan heater.
6. Do not hang anything on or in front of the
fan heater.
7. Always unplug the heater when not in use.
Do not pull the cord to unplug the heater.
8. Keep the air inlet and outlet free from
objects : at least 100cm in front and 100cm
behind the heater.
9. Do not install the heater right below a
socket.
10. Do not let animals or children touch or play
with the fan heater. The air outlet gets hot
during operation (more tha 80°C, or 175F).
11. Do not cover the heater
12. Do not use this fan heater in the immediate
surroundings of a bath, a shower or a
swimming pool or around water.
13. Do not use the fan heater in the rooms with
flammable liquids or gases or while using
inflammable solvents, varnish or glue.
14. If the cord of this appliance is damaged,
discontinue use of this product and contact
you're your nearest authorised service agent.
15. keep the fan heater clean. Do not allow any
objects to enter any ventilation or exhaust
opening as this may cause electric shock, or
fire damage to the heater.
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our
after-sales service department.
_ If replacing the power cord is necessary,
it should be done by the manufacturer or
his agent to avoid a hazard.
15
Publicité
