Installation Of The Operating Element - Sentiotec Wc4-B-Tch Instructions De Montage Et D'utilisation

Instructions for installation and use – only for experts P. 6/22
5

Installation of the operating element

3,5
36 92
39,5
82
Dimensions
A cut-out of 213 mm x 82 mm must be provided for the installation of the wave.com4 touch operating element,
into which the installation frame B is installed. In order to affix the frame, bend the brackets 'C' with a
screwdriver as illustrated in the Figure. The installation depth of the wave.com4 touch operating element is 36
mm.
C
C
C
C
B
A
Assembly of installation frame
Installation of the operating element into the installation frame
After wiring, (see wiring section) install the operating element A into frame B as in the Figure.
WORLD OF WELLNESS