Measuring Your Weight; Entering Personal Data - ADE FITvigo BA 1600 Mode D'emploi

Measuring your weight

WARNING against injuries
− Do not step onto the scales with wet feet or when its surface is damp.
Risk of slipping!
‚ For normal weighing – without body analysis – you do not have to
input any data.
‚ Weighing is also possible without the FITvigo app connected. If
you have connected the FITvigo app, the measured weight will be
transmitted to the FITvigo app after the weighing has concluded.
1. With a little force, step once briefly onto the weighing surface.
"0.0" and the set unit of measurement, e.g. "kg", will be shown on the display.
2. Position yourself on the scales. Remain standing still and do not hold on to
anything.
The measured weight will be displayed shortly thereafter.
A few seconds after you step off the weighing surface, the scales will switch off
automatically.
When the scales are switched off you can also step onto the scales directly.

Entering personal data

1. Press SET.
A memory cell number will be shown blinking (P1) on the display.
2. Using the or the
3. Press SET.
Using the or the
also a very sporty type of person, select the
4. Press SET.
On the display, the preset value for height (e.g. "175" for cm) will flash.
5. Using the or the
6. Press SET.
The preset value for that age blinks on the display.
7. Using the or the
8. Finally, press SET. You have thus input the necessary data.
"0.0" is shown on the display and you can perform your body analysis. If you do
nothing else, the scales will automatically switch off after a few seconds.
Body Analyser Scales BA 1600
button, select the desired memory cell.
button, choose your sex:
button, enter your height.
button, enter your age.
Measuring your weight
for male, or for female. If you are
symbol, too.
25