Using Colour Temp - Pioneer PDP-5080XD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

08
Setting up
ACL
Performs such compensation that results in the optimum contrast
characteristics for images
Selections
Off
On
Enhancer Mode
Selects processing of the image's high frequency (detailed) areas
Selections
1
2
3
Gamma
Adjusts the gamma characteristics (image gradation
characteristics)
Selections
1
2
3
5
Press HOME MENU to exit the menu.

Using Colour Temp

1
Press HOME MENU.
2
Select "Picture" (/ then ENTER).
3
Select "Pro Adjust" (/ then ENTER).
4
Select "Colour Detail" (/ then ENTER).
5
Select "Colour Temp" (/ then ENTER).
6
Select the desired parameter (/ then ENTER).
Colour Temp
Adjusts the colour temperature, resulting in a better white balance
Selections High
Mid-High
Mid
Mid-Low
Low
Manual
32
En
Deactivates ACL
Activates ACL
Selects Hard (SHARPNESS)
image
Selects Natural (SHARPNESS)
image
Selects Soft (SHARPNESS) image
Selects gamma characteristics 1
Selects gamma characteristics 2
Selects gamma characteristics 3
White with bluish tone
Intermediate tone between High and Mid
Natural tone
Intermediate tone between Mid and Low
White with reddish tone
Colour temperature adjusted to your
preference
• You may rather want to perform fine adjustment. To do this,
select "Manual" first and then press and hold ENTER for more
than three seconds. The manual adjustment screen appears.
Then go to step 7.
7
Select an item to be adjusted (/ then ENTER).
8
Select the desired level (/).
 button
Item
R High Fine adjustment
For weaker red
for bright portions
G High
For weaker green For stronger
B High
For weaker blue
R Low
Fine adjustment
For weaker red
for dark portions
G Low
For weaker green For stronger
B Low
For weaker blue
• To perform adjustment for another item, press RETURN, and
then repeat steps 7 and 8.
• You may press / to immediately change an item to be
adjusted.
9
Press HOME MENU to exit the menu.
Using CTI and Colour Space
1
Repeat steps 1 to 4 provided for Using Colour Temp.
2
Select "CTI" or "Colour Space" (/ then ENTER).
3
Select the desired parameter (/ then ENTER).
CTI
Provides images with clearer colour contours. The CTI stands for
Colour Transient Improvement.
Selections
Off
On
Colour Space
Changes the colour reproduction space
Selections
1
2
4
Press HOME MENU to exit the menu.
 button
For stronger red
green
For stronger blue
For stronger red
green
For stronger blue
Deactivates CTI
Activates CTI
Optimized for vivid, vibrant colour
reproduction
Standard colour reproduction

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pdp-sx5080dPdp-4280xdPdp-sx4280d

Table des Matières