Troubleshooting - CAPspray CS9900 Manuel De L'utilisateur

Problem
A. Restricted air flow or no air
flow
B. Filter warning light is on
C. The turbine has no power
D. Excessive arcing/sparking in
the turbine
Patents
These products are covered by one or more of the following U.S. patents:
5,423,395
D365,569
5,772,711
Spraytech 30-Day Satisfaction Guarantee
If, within a 30-day period from the date of purchase, you are not totally satisfied with a SprayTECH/CAPSpray unit, you may return
it for full credit toward another SprayTECH or CAPSpray product of equal or greater value.
© SprayTECH. All rights reserved.
Uncontrolled Copy

troubleshooting

cause
1. Air flow adjustment knob on the spray gun
is turned off
2. Air filters are clogged
1. Air filters are clogged
1. No power at the power supply
2. The fuse is blown
3. Worn turbine brushes
1. Worn turbine brushes
2. Damaged commutator
D322,790 5,181,832
5,556,255 5,639,222
Solution
1. Adjust the air flow adjustment knob
2. Clean or replace the filters
1. Clean or replace the filters
1. Check the power supply
2. Check and replace the fuse
3. Have the brushes replaced at an authorized
CAPSpray service center
1. Have the brushes replaced at an authorized
CAPSpray service center
2. Replace the turbine (contact a CAPSpray service
technician)
D338,208 5,174,610
5,702,131 5,558,492
5
5,550,336
5,573,371
English