ECOVACS DEEBOT Y1 Manuel D'instructions page 14

Connect Robot with App via Wi-Fi.
2.4 Charging Robot
Note: Connect the Power Cord.
1
1. Robot should be fully charged and turned on.
2. Wi-Fi indicator is on.
3. Turn off the mobile network.
Wi-Fi Network Requirements:
• You are using a 2.4GHz or 2.4/5 GHz mixed network.
• Your router supports 802.11b/g/n and IPv4 protocol.
• Do not use a VPN (Virtual Private Network) or Proxy Server.
• Do not use a hidden network.
• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
• WEP EAP (Enterprise Authentication Protocol) is not supported.
• Use Wi-Fi channels 1-11 in North America and channels 1-13
outside North America (refer to local regulatory agency).
• If you are using a network extender/repeater, the network name
(SSID) and password are the same as your primary network.
• Please enable the WPA2 on your router.
Please be aware that the realization of intelligent functions such as
remote startup, voice interaction, 2D/3D map display and control
settings, and personalized cleaning (depending on different products)
requires users to download and use ECOVACS HOME App, which is
constantly updated. You need to agree to our Privacy Policy and User
Agreement before we can process some of your basic and necessary
information and enable you to operate the product.If you do not agree
with our Privacy Policy and User Agreement, some of the
aforementioned intelligent functions cannot be realized through
ECOVACS HOME App, but you can still use the basic functions of this
product for manual operation.
EN∣14