Charge Status Indicator - Esperia E200D BRETAGNE Mode D'emploi

5.2. As soon aas you try to brake with one of the two brake levers, by means of
special sensors the control device will stop the power supply to the motor, which will
stop the pedal assist.
5.3. By releasing the brake levers, the control device will be ready to operate the
motor again.
WARNING: Slow down in case of rain. Use the brake levers in moderation. Adherence
of the tread to the road surface decreases in case of wet surfaces.
Do not touch the rotors immediately after use as they may reach high temperatures.
BURN HAZARD
6.

Charge status indicator

6.1. To check the battery power level, a special indicator on the battery pack will
indicate the charge that remains.
NOTE: in the event of sudden climbs such as bumps, overpasses or various types
of slopes, the indicator will turn off some LEDs as a result of an additional power
demand from the motor.
86
6.2. You can read the battery charge
status on the LED indicator:
• When the battery is fully charged, 4
LEDs will light up.
• During normal operation, with the bicycle
stopped, to check the battery charge
status, simply press the button at the side
of the battery highlighted in the photo at
the side.
• When the battery is partially discharged,
the number of lit green LEDs decreases
progressively.
• If the battery is completely low, a single
red led will alert the user to charge the
battery urgently.
6.3. During normal operation, another
indicator on the handlebar bend will
provide the user with an instant indication
of the energy status of the battery pack.