Safety Instructions; Possible Misuse - Orgapack CR 25 A Mode D'emploi Et De Sécurité

3
klsf klsd
lksdf kl
kl sdllk kl sd
fkl klk kl sdaf
asdf klk kl kl
ksldafk kl kl
kl klkl sdaf lk
kl kl klkl l lk
6 8 10
4 12
2 14
max. bar 0 16
05.07/WE

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating in-
structions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is ten-
sioned. The strap could
break!
Caution:
Danger of squeezing!
Do not put your fi ngers
into the tension wheel
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process.
Do not exceed the air
pressure!
Do not exceed the re-
commended air pressure
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling
Original
ORGAPACK
Original
ORGAPACK
Use for the intended purpose
The tool is intended for strapping round packages,
bundles of sectional steel, pipes etc.
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool processes steel straps only.

Possible misuse

The use of plastic straps is not possible.
ORGAPACK CR 25 A
Do not use a bottled
air or gas source!
Do not operate tis tool
by usining a bottled air
or gas source
Caution:
If work is carried out
using a spring balancer,
only a spring balancer
that complies with the
safety regulations may
be used.
Original ORGAPACK
seals must be used
exclusively.
Original ORGAPACK
spare parts must be
used exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
19