Publicité
Les langues disponibles
Les langues disponibles
Linking transmitter alerts with event icons
Up to 8 transmitters can be assigned to each event icon. This assignment can
be adapted by pairing.
Please keep in mind that a transmitter can only be paired if it is not yet
known in the memory of the receiver. If required, you might first have to
delete the transmitter from the memory (see Deleting transmitters). To pair
a transmitter with the receiver, do as follows:
a)
Keep the function button pressed for some time. The event icons begin
to light up in sequence. Let go of the function button as soon as the
desired icon is lit. (e. g. doorbell icon)
b)
Trigger the transmitter you want to assign to the lit up event icon. (e.g.
operate the doorbell button).
c)
Wait for about 20 seconds and test the function.
Deleting transmitters
If you wish to remove a transmitter assigned to an icon from the receiver
memory:
a)
Keep the function button pressed for a few seconds. The event icons
begin to light up in sequence. Let go of the function button as soon as
the desired symbol is lit.
Now press the function button and the delete button at the same time.
b)
All icons will briefly light up.
Please note: This will delete all transmitters which were assigned to the
according icon.
Event icons
doorbell (green)
person call (yellow)
fire alarm (red)
English 20
telephone (orange)
babycry (white)
alarm (red)
Publicité
