Shutting Down; Connecting Monitoring Devices And Headphones; Basic Menu Operation Procedures; Menu Structure - Tascam DR-44WL Mode D'emploi

SD/SDHC card
SDXC card
Press the ENTER/MARK button to start
3.
formatting.
CAUTION
Formatting an SD card erases all the data on
it.
When formatting is complete, it will return to
4.
the Home screen. You may format the card
whenever required.
CAUTION
When formatting the SD card, make sure the
unit is connected to the dedicated AC adapter
(TASCAM PS-P520U: sold separately), a
computer via USB bus power, or fully-
charged batteries.

Shutting down

While the unit is turned on, slide the HOLD/
switch of the left side panel in the
and, when TASCAM DR-44WL shutting down
appears, release the switch.
The power turns off in a few seconds.
Connecting monitoring devices
and headphones
To listen with headphones, connect them to the
LINE OUT jack.
To listen with an external monitoring system
(powered monitor speakers or an amplifier and
/LINE OUT jack.
speakers), connect it to the
Headphones Powered monitor speakers
an amplifier and speakers
8
TASCAM DR-44WL
Basic menu operation
procedures
Press the MENU button to open the MENU
1.
screen.
Use the wheel to select (highlight) one of the
2.
menu items, and then press the ENTER/MARK
button to go to the desired setting screen.
Use the wheel to select (highlight) an item to
3.
set.
Press the ENTER/MARK button or / button
4.
to move the cursor to the right and highlight
the setting value.
Use the wheel to change the setting.
5.
When setting a different item in the same
6.
menu, press the ENTER/MARK button or .
to move the cursor to the left.
Repeat Steps 3. to 6. as necessary to set other
7.
items.
When finished, press the 8/HOME button to
8.
return to the Home Screen.

Menu structure

MENU
MODE
REC SETTING
direction
AUTO FUNCTION
BROWSE
(only when the 4CH mode
is selected)
SONG
/ (only when the MTR mode
is selected)
TOOLS
REVERB
POWER/DISPLAY
SYSTEM
or

Recording

Recording Screen

The screen below is shown when the unit is in the
recording standby state or while recording is in
progress.
Display of the DUAL REC function on/off
1
status (4CH mode only)
No display: DUAL REC function off
Select recording or
playback mode
2 Display of reverb on/off status
Icon
Set for recording
Blank
Convenient
functions for
recorded files
3 Phantom power supply display
Operate files and
Blank: No phantom power supply
folders in the SD
card
Recorder operation status display
4
Set other convenient
These icons show the recorder operation status.
functions
Indicator Meaning
Set reverb effects
09
Set the power
0
supply and the
display
Display of the setting status of the PRE REC
5
or AUTO REC function (4CH mode only)
System settings of
When the PRE REC function is ON, the
the unit
shown.
When the AUTO REC function is ON, the
icon is shown.
File name/song name display
6
The file name that will automatically be given
to a recorded file is shown.
When there are multiple files in the 4CH mode,
only the format portion of the file names and
the basic number of the recording files are
displayed. When a single file is recorded, its
name is shown.
When the MTR mode is selected, the name of
an opened song is shown.
Recording screen in the 4 CH mode
Recording screen in the MTR mode
: DUAL REC function on
On/off status
Reverb off
Reverb on
(Recording with the effector on)
Reverb on
(SEND status)
: 48 V phantom power supplied
: 24 V phantom power supplied
Recording in standby or recording
paused
Recording in progress
icon