Names And Functions Of Parts; Top Panel; Front Panel; Left Side Panel - Tascam DR-44WL Mode D'emploi

Names and Functions of Parts

Top panel

Built-in stereo microphone
1
PEAK indicator
2
Display
3
4 TRACK/INPUT button
8/HOME button
5
. Fast rewind button
6
7/9 button
7
MENU button
8
MTR indicator
9
0 MIXER button
RECORD [0] button / RECORD indicator
q
/ Fast forward button
w
INPUT button
e
ENTER/MARK button
r
t QUICK button
Wheel
y

Front panel

Wi-Fi indicator
u
EXT MIC/LINE IN 1/L and 2/R terminals
i
(XLR/TRS)

Left side panel

SD card slot
o
HOLD/ switch
p
/LINE OUT jack
a
OUTPUT LEVEL button
s
d Wi-Fi button
6
TASCAM DR-44WL

Right side panel

EXT IN switch
f
INPUT LEVEL button
g
INPUT LEVEL volume
h
USB port
j

Bottom panel

Built-in mono speaker
k
Tripod attachment thread
l
(1/4 inch)
Battery compartment cover
;
Strap attachment
z
Battery compartment
x

Home Screen

This is the screen that is usually shown when the unit
is stopped.
Home Screen in the 4 CH mode
Home Screen in the MTR mode
Playback speed status display
1
Icon Playback speed
Blank Playback speed not changed
1.1× – 2.0×
0.5× – 0.9×
Playback speed cannot be changed
Display of the key control function on/off
2
status
Icon On/off status
Blank Key control function off
Key control function on
Key control function on
(setting disabled)
Display of the reverb on/off status
3
Icon On/off status
Blank Reverb off
Reverb on
(Recording with the effector on)
Reverb on
(SEND status)
Speaker output display
4
displayed: Speaker output on
not displayed: Speaker output off
Phantom power supply display
5
Blank: No phantom power supply
: 48 V phantom power supplied
: 24 V phantom power supplied
Power supply status display
6
When power is supplied from the batteries, the
battery icon shows the amount of remaining
battery power in bars ( ,
When the icon displays no bar,
the power subsequently turns off (standby
state) due to dead batteries.
When the dedicated AC adapter (TASCAM
PS-P520U: sold separately) or USB bus power is
used, is shown.
, ).
blinks, and