General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - B+BTec Diamond3 3510RS Manuel D'utilisation

GB DIAMOND3
contents

General Power Tool Safety Warnings . . 12

Special Tools Safety Warnings . . . . . . 14
Technical data . . . . . . . . . . . . . . . . . 15
Introduction . . . . . . . . . . . . . . . . . . . 15
Electricity and safety . . . . . . . . . . . . . 15
Characteristics . . . . . . . . . . . . . . . . . 15
Unpacking and set up . . . . . . . . . . . . 16
Various sawing processes. . . . . . . . . . 17
Safety . . . . . . . . . . . . . . . . . . . . . 18
Maintenance . . . . . . . . . . . . . . . . . . 18
Environmental protection . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . 19
Declaration of Conformity . . . . . . . . . 19
Spare parts . . . . . . . . . . . . . . . . . . . 20
ATTENTION! As our engineers
are constantly conducting
research and development on
our machinery to develop quality
products for the marketplace, our
product model(s) can be
changed without notice.
generAl power tool
sAfety wArnIngs
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
electric shock, fire and/or seri-
ous injury.
ATTENTION! Save all warnings
and instructions for future refer-
ence.
The term 'power tool' in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
3510/15RS - 4015RS
®

1) Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges and mov-
ing parts. Damaged or entangled
cords increase the risk of electric
shock.
e) When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of elec-
tric shock.
12