General Power Tool Safety Warnings - B+BTec Diamond3 professional MX11 Manuel D'utilisation

GB
CONTENT
Technical data . . . . . . . . . . . . . . . . . 11
General Power Tool Safety Warnings . . 12
Contents . . . . . . . . . . . . . . . . . . . . . 14
Symbols . . . . . . . . . . . . . . . . . . . . . 14
Safety symbols . . . . . . . . . . . . . . . . . 14
Intended use . . . . . . . . . . . . . . . . . . 14
Other risks . . . . . . . . . . . . . . . . . . . . 15
Safe operation . . . . . . . . . . . . . . . . . 15
Electrical safety . . . . . . . . . . . . . . . . 16
Assembly . . . . . . . . . . . . . . . . . . . . 16
Before use . . . . . . . . . . . . . . . . . . . . 16
Mains connection . . . . . . . . . . . . . . . 17
Switching on . . . . . . . . . . . . . . . . . . 17
2-Speed gearing . . . . . . . . . . . . . . . 17
Changing gears . . . . . . . . . . . . . . . . 17
Working with the mixer . . . . . . . . . . . 17
Maintenance . . . . . . . . . . . . . . . . . . 17
Storage . . . . . . . . . . . . . . . . . . . . . 18
Disposal . . . . . . . . . . . . . . . . . . . . . 18
EC Declaration of Conformity . . . . . . . 18
NOTE: As our engineers are
constantly conducting research
and development on our machin-
ery to develop quality products
for the marketplace, our product
model(s) can be changed without
notice.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
electric shock, fire and/or seri-
ous injury.
NOTE: Save all warnings and
instructions for future reference.
DIAMOND3
The term 'power tool' in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explo-
c) Keep children and bystanders
2) Electrical safety
a) Power tool plugs must match the
b) Avoid body contact with earthed or
c) Do not expose power tools to rain
d) Do not abuse the cord. Never use the
e) When operating a power tool out-
12
MX11
®
Cluttered or dark areas invite acci-
dents.
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
away while operating a power tool.
Distractions can cause you to lose con-
trol.
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges and mov-
ing parts. Damaged or entangled
cords increase the risk of electric shock.
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.