Technical Data; Introduction; Electricity And Safety; Characteristics - B+BTec Diamond3 3510RS Manuel D'utilisation

DIAMOND3

technIcAl dAtA

Type . . . . . . . . . . . . . . . . . . . . . . . . . . 3510 RS . . 3515 RS . . .4015 RS
Power . . . . . . . . . . . . . . . . . . . . . . . . . . 230 V/115V 230 V/115V . . . . . 400 V
Capcaity . . . . . . . . . . . . . . . . . . . . . . . 2,2 kW/3 HP 2,2 kW/3 HP . 3 kW/4 HP
Saw spindle speed . . . . . . . . . . . . [RPM]. . . . . .2.800 . . . . . 2.800 . . . . . 2.800
Blade diameter/hole . . . . . . . . . . . .[mm]. Ø350/25,4 Ø350/25,4 Ø400/25,4
Saw height max. . . . . . . . . . . . . . . .[mm]. . . . . . . 105 . . . . . . 105 . . . . . . 130
Sawing length up to. . . . . . . . . . . . .[mm]. . . . . .1.000 . . . . . 1.500 . . . . . 1.500
Saw table dimensions . . . . . . . . . . .[mm]. .1.000 x 640 . 1.500 x 640 . 1.500 x 640
Length . . . . . . . . . . . . . . . . . . . . .[mm]. . . . . .1.650 . . . . . 2.150 . . . . . 2.150
Width . . . . . . . . . . . . . . . . . . . . .[mm]. . . . . . . 650 . . . . . . 650 . . . . . . 650
Height (without legs) . . . . . . . . . . . .[mm]. . . . . . . 780 . . . . . . 780 . . . . . . 780
Weight . . . . . . . . . . . . . . . . . . . . . [kg]. . . . . . . 118 . . . . . . 136 . . . . . . 136
Noise level . . . . . . . . . . . . . . . . . dB (A). . . . . . . . 87 . . . . . . . 87 . . . . . . . 89
Noise level during sawing . . . . . . . dB (A). . . . . . . . 96 . . . . . . . 96 . . . . . . . 98

IntroductIon

This sawing machine is designed and
intended for the professional contractor.
The machine is equipped with a height
adjustable saw head which moves
horizontally along a guiding beam. The
material to be cut is positioned on the
saw table. The saw must be fed through
the material. Through continuous supply
of cooling water the cutting quality is
improved as well as the wear on the saw
blade is minimized. The cooling water
also absorbs the saw dust.
The quality and construction of this sawing
machine meet the highest standards. The
design is based on longevity and minimal
maintenance.

electrIcIty And sAfety

ATTENTION! On construction
sites electrical appliances should
be connected to specially
designed power supplies. Suita-
ble are grounded main power
supplies equipped with an earth-
leak switch of max. 30mA or
separating transformers. Non-
3510/15RS - 4015RS
®
15
grounded common household or
similar power outlets are not
suited as a power source.
For water cooled sawing machines stricter
safety standards are applicable. Therefore,
for extra safety the machine must be con-
nected according to one of the following
methods:
• Main power supply equipped with
earthleak switch 30 mA.
- - - - - - - - - - - - - - - or - - - - - - - - - - - - - - -
• Separating transformer, only 1
machine may be connected at any
given time
- - - - - - - - - - - - - - - or - - - - - - - - - - - - - - -
• With an intermediate cable equipped
with a PRCD safety switch of max.
30mA (ónly 115V/230 V machines).

chArActerIstIcs

Machine construction
The stainless steel construction contributes
to a stable, rigid and durable sawing
machine. The 4 detachable legs are to be
installed in the leg sockets at the underside
of the water container and fastened with
GB