LENCO MPR-034 Manuel D'utilisation page 7

Manual Preset
1. Tune to your desired station (See TUNING).
2. Press PROGRAM once to enter programming mode.
3. Press PRESET + or PRESET - to select the desired memory location.
4. Press PROGRAM once again to confirm the selected station.
5. To listen to a preset station:
• press the PRESET + or PRESET - for selecting your desired station.
Input Radio Station
Press Number Keys to direct enter the frequency of Radio Station. The unit will tune to the
entered radio station immediately.
To improve reception:
Pull out the telescopic aerial. To improve FM Reception incline and turn the aerial, reduce its
length if the FM-signal is too strong (very close to a transmitter).
USB, Micro SD Card PLAYBACK
Able to decode and playback all MP3 files which stored in the memory media with USB
connector, Micro SD Card.
1. Press FUNCTION once to MP3 mode.
2. Before connecting the USB media to the unit, make sure the port is in correct direction and
will connect. Or insert Micro SD Card straightly without bending.
3. The system will automatically start reading the MP3 files in the USB Storage Media, Micro
SD Card.
4. Press NEXT/PREVIOUS/PLAY Buttons for Next/Previous/PLAY functions.
5. Press Number Keys to direct enter the sound track sequence.
Wrongly connect the USB Storage Media, or Micro SD Card upside down could damage the
unit or the USB Storage Media or Micro SD Card. A locked SD Card cannot detected or
playback.
7