Preparing A Beverage - Nescafe Dolce Gusto T-fal GENIO 2 Mode D'emploi

P REPARI NG A B E VE R AGE
1
ON
Switch machine on. While machine is heat-
ing up, power button starts blinking red. After
approx. 30 seconds, power button light turns
steady green and machine is ready.
4
Use the lever to illuminate the bars in accord-
ance with the number of bars shown on cap-
sule, or set the bar display to your own taste.
Choose XL beverage for extra large cup.
7
Take cup from drip tray. Open the locking
handle.
2
30 sec
Adjust drip tray position according to the
chosen beverage (see page 6-7). Place cup on
drip tray.
5
300 ml
Move the lever to the right for hot beverages
and to the left for cold beverages. Beverage
preparation starts. Bar display lights vanish
progressively. Machine stops preparation auto-
matically. Extraction can be stopped manually
by moving the lever back to the middle position.
8
Pull out capsule holder and remove used cap-
sule. Put used capsule in capsule bin.
STOP
3
1
2
9
3
1
3
2
Open locking handle and pull out capsule
holder. Insert capsule in capsule holder and
insert it back in machine. Close locking handle.
6
After finishing preparation, bar display flashes
and power button blinks red for about 10 seconds.
During that time do not open the locking
handle!
9
Rinse both sides of the capsule holder with
water and dry. Insert capsule holder into ma-
chine. Enjoy your beverage!
EN
10 sec