Preparing A Beverage - Nescafe Dolce Gusto T-fal ESPERTA Mode D'emploi

PREPARING A BEVERAGE

1
ON
Switch machine on. While machine is heating
up, power button starts blinking red. After ap-
prox. 30 seconds, power button lights steady
green and machine is ready.
4
Use the selector wheel to illuminate the bars
in accordance with the number of bars shown
on capsule, or set the bar display to your own
taste. Choose XL beverage for extra big cup *.
7
Take cup from drip tray. Open the locking
handle.
* Can also be done while the machine is heating up.
All manuals and user guides at all-guides.com
2
30 sec
Adjust drip tray position according to the
chosen beverage (see page 5-7). Place cup on
drip tray.
5
Press hot or cold water button (depending on
beverage) *.
Beverage preparation starts. Bar display lights
vanish progressively.
Machine stops preparation automatically.
8
Pull out capsule holder and remove used cap-
sule. Put used capsule in capsule bin.
3
Open locking handle and pull out capsule
holder. Insert capsule in capsule holder and
insert it back in machine. Close locking handle.
6
After fi nishing preparation, bar display fl ashes
and power button blinks red for about 5
seconds.
During that time do not open the locking
handle!
9
Rinse with water on both sides and dry cap-
sule holder. Insert capsule holder to machine.
Enjoy your beverage!
9
EN
5 sec