First Use - Nescafe Dolce Gusto T-fal GENIO 2 Mode D'emploi

F IR S T U SE
1
E N
Rinse water tank at first. Fill water tank with
fresh, drinking water. Place cap and insert
water tank into machine.
4
Start rinsing with cold water:
Push the lever up to set the bar display to
maximum level. Move lever to the left for cold
water rinsing.
7
Machine starts rinsing. Wait until countdown is
finished and machine stops.
2
Open locking handle and insert empty capsule
holder. Close locking handle. Place capsule
bin under coffee outlet. Connect power plug to
mains power socket.
5
Machine starts rinsing. Wait until countdown is
finished and machine stops.
8
STOP
Empty capsule bin and refill water tank with
fresh, drinking water.
3
Switch machine on. While machine is heat-
ing up, power button starts blinking red. After
approx. 30 seconds, power button light turns
steady green and machine is ready.
6
STOP
Continue rinsing with hot water:
Push the lever up to set the bar display to
maximum level. Move lever to the right for hot
water rinsing.
9
Remove protection foil from drip grid. Place
drip grid on drip tray. Then attach drip tray at
desired position on machine.
8
ON
30 sec