Technical Data; Safety Devices - Angelo Po 1G1PE1E Manuel D'utilisation Et D'installation

Main Parts
A)Cooking plate: constructed in cast iron.
B)Plate control knob: sets the heating power.
C)Heating element control knob: for turning the oven
heating elements on and off (For version 191PE4E
only).
D)Thermostat light: indicates that the safety thermo-
stat has tripped.
E)Temperature light: indicates that heating of the
oven is in progress.
F) Mains light: indicates that the appliance is receiving
electrical power.
G)Fume exhaust vent: evacuates the heat generated
by the heating elements.
L) Static electric oven: in steel and complete with air-
tight door with heat-resistant handle .
See tables and "Connection chart" at the back
of the manual.
Although the appliance is complete with all safety
devices, during installation and connection addi-
IT
IT
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
GB GB The illustration shows the position of the devices.
A)Safety thermostat: cuts off the electricity supply
to the oven in case of overheating.
DE DE
B)Auto-resetting thermostat: each plate is equipped
with this device, which halves its power output in
FR FR
case of overheating. Once the problem has been re-
solved and the temperature has returned to normal,
ES
ES
operation is automatically restored.
Important
There are no indicator devices to signal
that the thermostat with automatic reset
has been tripped
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
English

TECHNICAL DATA

SAFETY DEVICES

A
B
C
B
L
- 4 -
G
D
E
A
F
B
A
IDM-39615100300.tif