EXIT Toys InTerra Ground Level Rectangular Mode D'emploi page 17

STEP 5
a.
Insert the Middle Leg (4) into the two
T-joints (5-2) as shown.
Repeat this step to assemble another
Middle Leg (4).
b.
Insert the two assembled Middle Legs
into the T-joints on the short side of
frame
c.
Insert the corner leg (3) into T-joint
(5-2) as shown.
Then insert the T-joint into the frame.
Insert the adjustable T-joints (5-1)
into the frame as shown.
d.
Insert the remaining two middle legs
(4) and two corner legs (3) into the
T-joints (5-2) and the adjustable
T-joints (5-1) as shown.
e.
Secure the leg to the T-joint with
M8x40mm bolts (12), M8 nuts (15)
M8x40mm Bolts (12), M8 Nuts (15),
and M8 washers (16) as shown.
Tighten with the wrench as shown.
a
5-2
b
c
3
3
d
e
15
16
3
12
InTerra
Trampolines
4
5-2 5-1
5-1
5-2
4
4
15
16
4
5
12
5-2
3
3
#
17