Manta lovio HOME ChefAssistant Mode D'emploi page 14

How to use the device
1. wash accessories with clean water, rinse and dry before use.
2 Place the unit on a flat, clean and dry surface, turn the arm lift levers (2) the arm will lift
automatically. (PG1 and PG2).
3 Fit the bowl cover to the tip as per step 2 in illustration PG2.
4 Fit the mixing bowl (4) onto the machine (step 3 in illustration PG3), turn the bowl clockwise until
you feel resistance and the bowl is locked - step 4 in illustration PG3.
5. the quantity of dough should not be exceeded - the total weight can be up to 1.5 kg;
6 Fit the required accessories (5)/(6)/(7) (only one of the three can be used at a time) onto the main
drive (1) as per step 5 in illustration PG4, push the fitted end upwards and then turn a quarter turn
anticlockwise to the locking position - step 6 in illustration PG5.
7. press the arm lift lever(2), gently push the arm down so that it returns to the horizontal position
and you will hear the arm lift lever lock(2) click. (When the arm is raised the unit will not turn on.)
8. then plug in the plug and switch on the power switch.
9. Set the speed knob (3) to the desired speed to start blending.
10. Once the dough has reached the desired consistency, turn the speed control knob (3) back to
speed 0 to finish.
11. when finished: turn the arm lifting levers (2) clockwise, raise the arm, turn the mixing bowl
counterclockwise, remove the bowl, then remove the dough.
12. turn off the unit and unplug it before changing accessories or approaching moving parts during
use
!
!