Télécharger Imprimer la page
Les langues disponibles

Les langues disponibles

Liens rapides

Read this before setup
Thank you for choosing this YAMAHA SPS-HF101 speaker stand.
Read these precautions carefully before setting up the SPS-HF101.
• This speaker stand is only for the speaker systems
listed in "USABLE SPEAKERS" below. Do not use
the speakers other than these listed.
• Only use the screws provided to assemble the
stand and to attach the speakers. Do not use
other screws (e.g. commercially available
screws).
* This stand uses both metric and English (inch)
sized screws; the two types are not
interchangeable.
* Even if the diameter or length of screws are
identical, their pitch (the distance between
threads) may differ. Using the wrong screw may
damage the threads, causing the speaker to fall
down.
• To prevent the speaker from falling, use the screws
and parts provided with the stand.
• To prevent the speaker stand from falling over,
select a location which is flat and stable.
• Leaving the stand directly on the floor for an
extended period of time may cause the anti-slip
pads to adhere to the floor. Place the stand on
carpet if possible.
YAMAHA
• NS-F101
Dimensions (W x H x D)
Weight
* Specifications are subject to change without notice due to product improvements.
SPEAKER STAND
SPS-HF101
CONSUMER PRECAUTIONS
USABLE SPEAKERS
SPECIFICATIONS
330 x 953 x 330 mm (12-9/10" x 37-1/2" x 12-9/10")
3.8 kg (8.38 lbs)
• To avoid accidents resulting from tripping over
loose speaker cables and to prevent the speaker
stand from falling over, fix the speaker cables to
the wall, etc.
• Do not let children lean on the stand, as this might
cause a serious accident due to the speaker stand
falling over.
• To prevent the speaker stands from discoloring
and/or warping, keep the speaker stands away
from heat sources (stoves, etc.) and places where
it will be exposed to direct sunlight.
• Do not attempt to clean the speaker stand with
chemical solvents as this might damage the finish.
Use a clean, dry cloth.
• Secure placement or installation is the owner's
responsibility.
YAMAHA shall not be liable for any accident
caused by improper placement or installation
of speakers.
SETUP
INSTRUCTIONS
E-
1
loading

Sommaire des Matières pour Yamaha SPS-HF101

  • Page 5 SPS-HF101 DE MONTAGE Veuillez lire ce qui suit avant l’installation Nous vous remercions d’avoir porté votre choix sur ce pied d’enceinte YAMAHA SPS-HF101. PRECAUTIONS Lisez attentivement les précautions avant d’installer le SPS-HF101. • Ce pied d’enceinte a été conçu uniquement pour au plancher.
  • Page 6: Déballage

    DÉBALLAGE Après le déballage, vérifiez qu’il ne manque aucun des éléments ci-dessous. Support Base Chapeau Vignette de protection de câble (pour la base) Patins antidérapants (pour la base) Patins antidérapants (pour le support) Vis de montage Vis de montage Entretoise exclusives pour la base exclusives pour (dimensions métriques)
  • Page 7 INSTALLATION DU PIED D’ENCEINTE PIED D’ENCEINTE MONTÉ Fixez le support sur le fond de la base à l’aide des vis de montage exclusives pour la base. NS-F101 * Ne serrez pas excessivement les vis. Cela pourrait endommager les vis ou l’ensemble. * Un réglage de la position des vis de montage même très faible peut endommager ou rayer le support et le fond de la base.
  • Page 8: Installation Du Pied D'enceinte

    INSTALLATION DU PIED D’ENCEINTE Fixez le chapeau sur le support, et collez les Comme indiqué sur le schéma, placez patins antidérapants comme indiqué ci- l’entretoise entre l’enceinte et le support, et dessous. utilisez les vis de montage exclusives pour enceinte pour fixer l’enceinte au support. * Lorsque vous fixez l’enceinte, faites attention de ne pas la faire tomber.