Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. OPERATION
3.6 MANUAL MODE
In manual mode, the radiator works like a room thermostat.
ACTION
1
Choose the manual mode by pressing the
the "hand" symboL
The temperature shown on screen is the temperature that
was previously selected in manual mode.
The pre-set factory temperature, in manual mode, is
19ºC.
2
Press the
temperature, for example, 21ºC.
The LED located above the screen will
switch on when the radiator is heating.
The temperature selected in manual mode is not related to the comfort
temperature. They are independent temperatures and, therefore, must
be configured separately.
appears on screen.
buttons to choose the desired
SCREEN
key until
CERATECPRO
EN
EN
37
Publicité
Table des Matières
